Remember When...

..you were different, a rebel, or thought it was cool to wear a Harley shirt?

From the Pre-Evo era. I bought this one at the Orange County M/C swap meet around 1979-80.


A friend of mine (not pictured) had this one. This design was being sold around the same time as the one above. In case you can't make it out, it's a big Harley tattooed arm squeezing three little cartoon (and not very flattering), Japanese dudes. Their hats read, Honda, Suzuki, and the other either said Yamaha or Kawasaki ? (from the Harley Porn photo page)


I thought this one was funny and wore it until it was a tattered rag. I believe it's dated 1988. Acid wash and graphics certainly date it.

I'm sad to say, I pretty much stopped wearing factory shirts about 10 or so years ago. It felt like it went from cool to bandwagon way before that. I just don't dig to be lumped in with the stereotype image of today's Harley rider or how corporate or marketed it's all feels. Most of the new shirt's designs aren't my style to boot.

Now don't go thinking I'm ALL anti the Factory or new bikes. Sometimes I cut them slack and sometimes I don't. Maybe it's just because "Nothing's Cool Anymore"!!

Noot's Dresser

Actually, he just thought I'd like this old school '67 dresser from Sturgis. The tail piece is outrageous and those lanterns really crack me up. It's cool to see these old land barges are still being ridden.

Blog Blahs

I've been slow posting. Once you start one of these dang blogs, you constantly feel obligated to keep posting new stuff all the time. Usually I have a bunch of stuff to post and feel like I'm holding back, but lately I just haven't felt like spending the time scanning, or photo editing, or writing. Maybe it's just August. It's the month of no holidays, nothing much happening and everyone goes on vacation before summer's over. I kind of hate just throwing photos up, but...

...For now, here's a groovy space filler. Retouched photo (removed photo insert), of the cover feature bike.... make that trike, from the Feb. 1972 Street Chopper.

I need to "snap out of it"!

Gunther's Knuck

A little while ago, Joe Hurst sent this shot of a buddy's Knucklehead from an old car/bike show.

Joe was a judge at the show and gave it First Place in it's class. When some others protested it was favoritism, Joe replied, "show me a nicer bike"!... they couldn't.

Looks cool, I'd like to see the whole bike. Dig the paint and the skinny matching seat.

Born-Free 3 #4 The last post

This will likely be the last full post I do on the show. Not to mention, by now, you've probably seen most of the same bikes over and over again.

I like old Triumphs the best when they tight and simple. That is not to say that it's simple to build a bike like this.


It's not hard to make a rigid look good, so I'm always interested to see how different guys handle a swing arm bike.


Hogan, who won the best bobber also owns this Panhead. I sort of have a problem with white frames... not the most practical color for and old Harley.


VL frames have made a comeback. Some make room for an overhead mill better than others. This is one of the better ones. Also, It appears the hard tail was replaced with a EL/FL rear section.


Josh resets the knuckle just before the winner is announced. I think he's doing a double take to make sure it ain't gonna fall off it's side stand. The guy with all the camera gear is the famous biker photog Michael Lichter.


One different way to set up a shovel. The rear seat doubles as an auxiliary fuel tank.


Shameless Self Promotion. A few goodies in my booth. I hand color (paint), black and white line art prints. The goal is to make and sell affordable one off original art.


This very cool 1938 knucklehead was runner up for the Best Bobber Award. It was a very tough decision between it and the Panhead I ultimately picked.


It wasn't just choppers. Todd had his own display full of antique bikes. This all original cop bike ran like a sewing machine.

I may post a individual shot of a particular bike here and there, other than that... That's all folks!

AEE's Big Twin Lives...

...well, sort of.

I thought I had read somewhere that it still existed.

Blog reader Stu, sent an email to let me know it's on freewh33ler.blogspot.com explaining that it's for sale on ebay right now. Item#170675591779. Note the outboard wheel is just placed here for the photo since it is both unbolted and inside out.


The replaced fork and front wheel assembly totally sucks and betrays Ed Newton's original elegant design. It originally showcased a narrow AEE Springer (which is how it looked the best). When AEE repainted it to this color scheme, they replaced the springer with a rigid girder style fork (not the current forks). You'd think that if anything would have been pirated, it would have been the engines.


Someone had the brilliant idea (NOT!), to modified the frame to accept a blower.


Besides the fact that they shouldn't have modified a classic show piece, the blower mod kind of ruins the effort of the reversed heads of the left side. The original intention was for the pipes and carbs to be a symmetrical mirror image of each side. The listing mistakenly states that machining of the flopped heads was done by Harley, it was actually performed by AEE's own machine shop. Good God, what happened to it's seats?!!


Note that it was licensed and tagged up to June 1980, meaning it was likely driven on the streets.


My vote would be to put it back to it's first incarnation's paint and forks.

I guess it's better that it has survived in this shape than not at all. Now all that is needed is for a rare individual who has the means and desire to rescue and restore it to it's former glory.

This Month's Header-Under The Influence

I did this drawing sometime in 1973 and you can clearly see the influence of the two bikes below.

Much of the general design was inspired from Joe Hurst's White Bear, but I used a Cone Motor instead of a Generator Shovel.

The bike from the center spread of Big Bike Magazine Sept. 1972 was the other source of influence. Borrowed from it were the rear fender, polished mags, rectangular headlight, pullbacks, and much of the style of the paint. It was also a South Bay bike but had more of a AEE Choppers look rather than the Dick Allen/Fats South Bay Style. The photo looks to be taken at the break water in King Harbor Redondo Beach, CA. with the Palos Verdes Peninsula in the background.

Flocking Ecstasy

There is so much going on with this 1966 Electra-Glide and it's display it's almost hard to figure out what is what. Mirrors, lights chains, tinsel garlands, signs, trophies, drapes, skulls, devil heads, coins, and confetti.... and then there's the bike. How about that flocking paint job! (Purple Velvetex). Read what you can on the sign. It makes for one busy photograph, but it must have been fun to see in the flesh.

L.L.Long Bike Art

Here's a drawing I did either late in 72, or early 73. Long bikes were still in but getting lower. No high seats and pipes. The performance trend was gaining strength. Big carbs, magnetos and custom oil tanks were the hot set up... as were "Hot Pants" (short shorts on da'ladies).

The Chrome Frame Chronicles

The story of Dick Allen's/Joe Hurst's Chrome Frame Bike is complex and varied. At one time, Joe pulled the running gear out to put in the Green Bike. A buddy with an unfinished bike then asked if he could ride it (the Green Bike), to Northern California. Joe said, "is your motor and trans done"? When his friend answered, "yeah", Joe told him he could put it in the chrome frame roller for the trip. Sometime later, Joe put it's motor and trans back in and sold it.

This is probably right before Joe sold it. It was originally fitted with a H-D Sprint tank. Here it has a larger Super -Glide tank.


After it was sold and painted blue by the new owner. Looks good. Just about any color will work with a chrome frame.


Joe got it back years ago. Here's how she sits today.

Chrome Won't Get You Home...

...but it might get you a trophy.

Some guys think if a little is good, a lot is better. Chrome or not it's a pretty cool old scoot. Okay, the risers and bars are a bit much, but it was for show.

New Rubber...

...for the road.

A long over due tire change. The old Continental sucked and was on borrowed time. I've had the new Dunlop for about year. Don't know why I put off the most simple things? Getting stuff like this done gives peace of mind.

Born-Free 3-3

Okay, are you tired of seeing Born-Free yet? If not, check it out. I know I missed a lot of them and you might have seen these same bikes on other blogs, but what the hell.

If I make any mistakes on the credits/owners, let me know.

Jeremiah of Love Cycles entry in the Builders Invite. I probably don't have to say it's his. Jeri's bikes have a style of their own, you just know. His spartan style is quickly developing a following.


Jeff Leighton's Knice Knuckle. Not the sharpest picture but I had to include it. Great stance, paint and combination of parts. So how does one safely extend a VL fork?


Lord knows I'm not a Honda guy, but this 750 from Sunrise Cycles is pretty damn slick. My two cents.... I would have left the engine cases natural or polished.


His....

...and Hers. I've seen both of these bikes in my neighborhood. The handlebars, sporty tanks with flames makes me think they are of Fats influence more than that of Dick Allen. Also, because of the headlights, seats, tires, fork width, and billet controls, I'd call them modern takes on the South Bay style.


The vintage look of this clean Panhead (black skinny wheels and springer), almost tricks you into thinking it's a Knuckle at first glance.


One for Noot. Does a Sportster qualify as a Bob Job? It's very close to some ideas I've had, but I'd like it a wee more with polished alloy rims, brakes, and with chrome shock dust covers and fender struts.


The Sunsetter from 1965. The original owner/builder (lost his name), was in attendance and very proud. The current owner told me the frame and chrome is all original and that he only had the tank and fender re-painted. That leads me to believe that it probably only had minor flaws and he should have left it alone!!!! The current buckhorns kill the look, put the drag bars back on it!


A really nice shovel ala Shawn Donahue. I heard more than one guy say it's his pick. It's similar style and mostly black paint made for good juxtaposition to John Edward's scooter. The bright afternoon sun made it hard to shoot these clean machines.


Ironhead Ron took advantage of some shade and a chair in my booth. I'm not quite as grumpy as I look, just don't like my picture taken much.

Maybe one or two more Born-Free post to come.

Chrome Frame Confusion

After seeing the Chrome Frame Lives post, Bruce Parrish sent this photo and said, " I see the South Bay saga continues. This is the tank I painted for the Chrome bike. As I remember it was for Doc . He had something similar to this eagle a few years earlier". (Note that the bike is in the house next to the Christmas Tree.)


When I posted Joe's first version of Dick's chrome frame bike, I purposely left out this cool photo and was saving it for another day. As I remembered it, Joe told me that Bruce repainted it for him based on the Eagle he did for Doc.


Joe later sent this photo showing how it looked when he got the bike from Doc in '73. It was originally pearl white with yellow tips. Bruce said he didn't do this version and did not come up with the Eagle Scallops concept but instead had traced it for the silver to black version.


Joe liked the motif so much he used it once again on his green bike. What makes things even more confusing is that this bike seems to have all the drive train components from the Chrome Frame Bike including the oil tank with the peg mounts. (Note the neck, and it's similarity to the one done later on Bruce's Funny Bike.)

Joe's thinking of using the Eagle design again on the latest build of the Chrome Frame Bike, but with a new twist.

CK's Chopper Sculpture

First, I posted Greg Parigian's sculpture and then Bruce Parrish's, so here's mine. It was done in the fall session of my senior year in 1972. It was part of an assignment in a art class where we were suppose to learn the craft of lost wax casting a plaster figure. Of course I made a biker figure for the bike using a wire armature covered with and sculpted in wax. I never did the casting part nor remember any classmates doing it for that matter. I think we all ran out of time.

It's a time consuming yet primitive technique since it takes no welding or soldering skills...
...just needle-nose pliers and wire.

Check out the amazing detail!... ...I kid.


I wish this old photo was better. The figure was actually fairly detailed and pretty cool. I kept it in a box with other stuff for a long time but finally grew tired of the wax sticking to things so tossed it. I now regret that.